D. P. ENGINEERS
Heating Coil

Heating Coil

Send Inquiry
Cooling Coil & Heating Coil offered by us is applauded for its sturdiness, longer service life, dimensional accuracy and corrosion resistance features. It is made from annealed & seamless copper tubes.

Fins of Cooling Coil & Heating Coil:

  • Aluminum used for fins are super slit fins.
  • Copper tubes are hydraulically/mechanically expanded within fin collars to from permanent bond between fin & tube

Header:

  • M. S. Seamless pipe or copper pipe of heavy gauge

Casing

End covers; top & bottom channels are manufactured of 16 gauge of g. I sheets for protection & long life

  • Venting & draining system: the coils require only one drain & one vent
  • The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

Chilled water cooling coil: 4/6/8 row, dx cooling coil: 4 / 6 / 8 row, heat transfer coil: 2 / 3 row

Our range includes:

  • Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
  • Sourced from reliable vendors, we use good quality of 1/2" copper tube in the production of our gamut
  • We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
  • We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tons ice capacity per day
  • Procured from genuine vendors, we use good quality of raw material in the production of our gamut
  • This chilled water coil is completed with: Cabinet, Fans, Drain tray, Ceiling suspension tray
  • Electronic Coils. Industrial Coils
  • Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
  • The raw material includes 1 1/2' C class and ISI duty ERW tubes
  • These are heavy duty receivers which are fabricated with the MS plate and have good molding. Furthermore; it is manufactured in accordance with international standards and is delivered within specified time frame.